tomath
Newbie level 6
- Joined
- Feb 20, 2014
- Messages
- 11
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1
- Activity points
- 94
Hello guys,
I have designed a probe fed antenna using HFSS, and I am now on the stage of fabricating the antenna. However, I figured the radius of my probe pin is 0.03 mm (with coax radius of 0.1mm) , which in my opinion, is too small for manufacturing. This is my first time manufacturing probe fed antenna, and I wanted to know what the typical measure for probe is in real life?
Thanks in advance!
I have designed a probe fed antenna using HFSS, and I am now on the stage of fabricating the antenna. However, I figured the radius of my probe pin is 0.03 mm (with coax radius of 0.1mm) , which in my opinion, is too small for manufacturing. This is my first time manufacturing probe fed antenna, and I wanted to know what the typical measure for probe is in real life?
Thanks in advance!