Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

[SOLVED] designing issue in Proteus

Status
Not open for further replies.
V

vreg

Member level 4
Member level 4
Joined
Oct 16, 2012
Messages
70
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Activity points
1,935
I need to interface AD0-AD7 of 8086 to pins D0-D7 of 8255. However, the wires cannot be connected directly to the bus. Please help
 

**broken link removed**
 

You need to connect a bus to the existing but and then wires from that to the individual pins.
Then add labels for the wire identifiers.

proteus_bus.jpg

Search for the word bus in isis manual
 
  • Like
Reactions: vreg

    V

    vreg

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top