Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Designing common source amplfier at180nm technology

Status
Not open for further replies.
S

Saumil Vora

Newbie
Newbie level 1
Joined
Jul 14, 2015
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
7
Dear All,
I am designing a common source amplifier that can provide gain of 28dB. I have used diode connected load topology to design it. I want to know how should i set biasing points and widths of both the transistors in circuit? I am using TSMC 180nm file.
 

Depends on required bandwidth and load impedance. Check G00GLE for common source amplifier, you'll get a lot of useful lectures, tutorials and examples.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top