cedric973
Newbie level 1
- Joined
- May 15, 2011
- Messages
- 1
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Activity points
- 1,287
Hello everybody,
I try to design a circular or a square patch with chopped coners (single fed). I look the microstrip antenna book of kumar and ray page 331-332 but there is a problem.
For the cricular patch at the frequency 950Mhz, er = 10.2, h= 2.5mm,K11=1.84118, I find a radius = 28.79cm, a Q0= 116 (find in the book), and the l (for the chopped corners) = 2.441mm.
If somebody have experience in this subject, can you help me please?
Thank you in advance.
I try to design a circular or a square patch with chopped coners (single fed). I look the microstrip antenna book of kumar and ray page 331-332 but there is a problem.
For the cricular patch at the frequency 950Mhz, er = 10.2, h= 2.5mm,K11=1.84118, I find a radius = 28.79cm, a Q0= 116 (find in the book), and the l (for the chopped corners) = 2.441mm.
If somebody have experience in this subject, can you help me please?
Thank you in advance.
