kaandee
Member level 2
- Joined
- Oct 16, 2009
- Messages
- 49
- Helped
- 2
- Reputation
- 4
- Reaction score
- 2
- Trophy points
- 1,288
- Location
- Australia
- Activity points
- 1,594
Hi freinds
I have designed simple band pass filter using CST MWS 2008.
I used CST Microwave studio from CST design environment.
after design the band pass filter in CST microwave studio, there is another block (default) MWSSCHEM1.
How can i remove this. because when i click update button, it says "Unable to built S-matrix for block MWSSCHEM1" as shown in Figure 1
there is another problem in upper frequency limit as shown in figure 2
plz any one help me
Thank you
kaandee
I have designed simple band pass filter using CST MWS 2008.
I used CST Microwave studio from CST design environment.
after design the band pass filter in CST microwave studio, there is another block (default) MWSSCHEM1.
How can i remove this. because when i click update button, it says "Unable to built S-matrix for block MWSSCHEM1" as shown in Figure 1
there is another problem in upper frequency limit as shown in figure 2
plz any one help me
Thank you
kaandee