khungbopro
Member level 1
- Joined
- Jan 8, 2013
- Messages
- 33
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,286
- Activity points
- 1,484
Hi everyone,
Can you help me to design a band pass filter using ADS and microstrip technology. The parameters of the band pass filter are:
1. Center frequency: 1.575GHz
2. BW=50MHz
and the following is parameters of the substrate:
1. εr=4.6 (Fr-4)
2. H=1.59 mm
3. T=0.035 mm
4. Tand=0.02
5. Match Impedance = 50 Ohm
In addition, can you tell me the way to caculate the parameters of components in you design (ex: W, L of MLIN...)
Thank you very much and looking to hearing from you soon.
Can you help me to design a band pass filter using ADS and microstrip technology. The parameters of the band pass filter are:
1. Center frequency: 1.575GHz
2. BW=50MHz
and the following is parameters of the substrate:
1. εr=4.6 (Fr-4)
2. H=1.59 mm
3. T=0.035 mm
4. Tand=0.02
5. Match Impedance = 50 Ohm
In addition, can you tell me the way to caculate the parameters of components in you design (ex: W, L of MLIN...)
Thank you very much and looking to hearing from you soon.