Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Demonstrate this Hypothesis

Status
Not open for further replies.

mhrm.electronic

Newbie level 3
Newbie level 3
Joined
Jul 24, 2007
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,299
hi
please help me to Demonstrate this Hypothesis

in the RC(RL) circuit all of the natural frequences are real and Negative
 

why would is be negative ?
 

Hi,

If H(p) is a transfer function of a linear passive network (when p=σ+jω), then the poles of H(p) have real part negative (or zero if the network haven't resistors) because the network is passive and then Liapunov stable. If the real part is zero the network is Liapunov unstable but BIBO stable (a LC oscillator is BIBO stable but not liapunov stable).

A pole with positive real part generate unstability, only active network may admits pole with positive real parts.

Best Regards

Ninux
 

mhrm.electronic said:
hi
please help me to Demonstrate this Hypothesis
in the RC(RL) circuit all of the natural frequences are real and Negative

I think, up to now there is no answer to your question.
Well, here is an answer:

1.) Definition: If a system of second order is exposed to a step function it reacts with a damped sine wave (if the pole Q is larger than 0.5). The frequency of this signal is the "natural frequency".
2.) This frequnecy, of course, is always positive. However, as the amplitude of this signal decreases with time (for a stable system), the damping factor "sigma" is negative. That´s all.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top