Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

defining a resistive strip in CST

Status
Not open for further replies.
L

lkminz

Member level 4
Member level 4
Joined
Jun 14, 2008
Messages
76
Helped
11
Reputation
22
Reaction score
10
Trophy points
1,288
Visit site
Activity points
1,998
Hi

I am designing a dielectric rod antenna which consist of a resistive strip with the profile shown in attached figure.
please help me to define a metal strip with given resistance profile in CST.

thanks

lkminz
 

Attachments

  • resistive strip profile.bmp
    1.1 MB · Views: 95

i came to know that commercial resistive strip of such profile is known as resistive card.
its available commercially but still i could not find how to define such profile resistive card in CST....
pls help
 

Hi

I am not sure you can define resistance of material as a function.
You could attempt to make such profile from a several blocks with different resistances connected together, this could give a good approximation.

Tim
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top