De-embedding measured S2P using ADS

Status
Not open for further replies.
M

mohandes79

Junior Member level 3
Joined
Nov 3, 2006
Messages
31
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Visit site
Activity points
1,445
Hi All,

I have got a measured s2p file and I need to de-embed it. I have also measured Open, Short, and Thru.

What would be the straightforward method using ADS to de-embed the raw data?

Thanks!
 

I think that is only measuring using test fixture. De-embed it become after additional test fixtures Open, Short, and Thru.
 

Something like these.
 

Attachments

  • Snap117.jpg
    119.6 KB · Views: 182

Thanks for your info. Let me explain more, I have taped-out a passive component and I would like to de-embed the PADS effect. I have also taped-out an OPEN, SHORT, and THRU of the DUT structure. How can I perform de-embedding?
 

On the pic. is thru and you should add short, loaded with small noniductive resistors and proper length and so on .
It has successfully Dan such staff for 2.5GHz. One company doesn't provide S par for one PA chip. Only ref design, witch was not so accurate with unknown substrate and crazy thickness.
And you should have bias network as well.
 
Last edited:

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…