5v dc 1.5 a
Hi all,
I need to switch between 4 identical devices of 5V and 1.5A. When i turn on device 1, devices 2,3 & 4 should be off. When i turn on device 2, devices 1,3 & 4 should be off and so on. (Pls see attached picture)
CMOS compatible digital outputs are available from my PC controlled DAQ board if control is needed.
I have tried looking for multiplexers or demultiplexers from TI and analog devices. However MUX and deMUX are usually for digital signals, hence, only low load currents are permitted. 1A is definitely out of the question.
Here, i need about 1.5A to pass through this switch each time. Any practical solutions?
Kindly help!