differentside
Newbie
hello, I need to design an electric engine start system with DC or BLDC motor to result more than 16Nm torque before reaching 2400 rpm. [im using matlab and simulink]
I've experienced designing simple pid controller but not getting the idea to start this project.
so these are some specs given to me....
- input= 28V DC, battery = 24V dc, max current = 500A
- the wire from battery to motor is AWG 1 (d, A, L, R/m given)
I guess i have to choose a specific motor for this modeling project and find the transfer function.
Than i don't have an idea about what controller I have to use and how to tune them.
Also, is there a way to see the graph of torque vs rpm in matlab?
I will be very appreciated if somebody can help me with this.
thank you so much !!!!
I've experienced designing simple pid controller but not getting the idea to start this project.
so these are some specs given to me....
- input= 28V DC, battery = 24V dc, max current = 500A
- the wire from battery to motor is AWG 1 (d, A, L, R/m given)
I guess i have to choose a specific motor for this modeling project and find the transfer function.
Than i don't have an idea about what controller I have to use and how to tune them.
Also, is there a way to see the graph of torque vs rpm in matlab?
I will be very appreciated if somebody can help me with this.
thank you so much !!!!
Last edited: