Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

DC feedback in amplifier design

Status
Not open for further replies.
Sadegh.j

Sadegh.j

Advanced Member level 3
Advanced Member level 3
Joined
Nov 29, 2006
Messages
749
Helped
48
Reputation
98
Reaction score
15
Trophy points
1,298
Activity points
5,585
Hi

To design amplifier, one very useful method that I have come across is to use a DC feedback to fix the DC level of the output. Can some one elaborate on this?

Thanks
 

You can set output DC level by output caps but after caps it must be inverter with negative resistive feedback.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top