Foufou
Member level 5
- Joined
- Oct 22, 2006
- Messages
- 93
- Helped
- 3
- Reputation
- 6
- Reaction score
- 2
- Trophy points
- 1,288
- Activity points
- 1,871
Hi
using ADS, when we define the correct DC biais values of the RF and the LO port to have transistors working in saturation for exemple Vdclo=1.2V and VdcRF=1.5V, when I finish the hole design, how could I replace the DCs tensions used ? using Vdd tension of my circuits
thinks
To do, we sould add the transistors like in figure attached,
but the question is how could I manipulate W/L (of the added transistors)to have the Desired tensions
Help and exemple
thanks[/img][/GVideo]
using ADS, when we define the correct DC biais values of the RF and the LO port to have transistors working in saturation for exemple Vdclo=1.2V and VdcRF=1.5V, when I finish the hole design, how could I replace the DCs tensions used ? using Vdd tension of my circuits
thinks
To do, we sould add the transistors like in figure attached,
but the question is how could I manipulate W/L (of the added transistors)to have the Desired tensions
Help and exemple
thanks[/img][/GVideo]