Datasheet: Output capacitance at Static(DC) vs Dynamic(AC) ? diff

Status
Not open for further replies.
F

faizalism

Member level 4
Joined
Feb 3, 2006
Messages
78
Helped
4
Reputation
8
Reaction score
4
Trophy points
1,288
Visit site
Activity points
1,850
Hi,

I am referring to 1 of the datasheet and found that they stated different output capacitance at Static and Dynamic characteristic.
ie.

Static, Co output capacitance , min = -, max =7pF

Dynamic, all output load = 25pF

Why there is different for that capacitance setting? Any specific reason.

Thanks,
 

Static and Dynamic capacitances are terms used with respect to frequency of operation of the design. Static means the cap offered by the design with the low frequency while at higher frequencies it is 1/jwc so there are two numbers. Also static will also mean there is no activity so it will amount to the total metal cap offered while in dynamic it includes the Cgs,cgd etc of the driver along with the metal cap.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…