current waveform in oscilloscope

Status
Not open for further replies.

manishanand14

Full Member level 4
Joined
Sep 3, 2011
Messages
203
Helped
10
Reputation
20
Reaction score
9
Trophy points
1,308
Location
Bangalore ,India
Visit site
Activity points
2,572
Hello Everyone

Please tell me if it possible to see current waveform in an oscilloscope and how.

For example current waveform through an inductor in a DC-DC converter.
 

Yes. Current probes are offered from major oscillsocope manufacturers, you can also use wideband current transformers or shunt resistors. While the latter require to cut the current path, current probes are mostly clamp-on type.
 
So you need to refer to the other options.

Shunt measurement will probably require a fast differential amplifier to pick up the voltage.

Current transformer can be easily made: A small, high µr ferrite torroid of 5 to 10 mm diameter. 10 to 50 turns secondary winding, terminated with a low ohmic resistor or 50 ohm oscilloscope input.
 
Reactions: Technar

    Technar

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…