current source transformation

Status
Not open for further replies.
Not sure I've understood your question.
However if you have a Thevenin equivalent circuit, that is a voltage generator Vth with series resistor Rth, and you want to convert it into Norton just put the resistor Rth in parallel with a current generator having I=Vth/Rth.

Viceversa if you have a Norton equivalent circuit, that is a current source Ino with parallel resistor Rno, and you want to convert it into Thevenin just put the resistor Rno in series with a voltage generator having V=Ino*Rno
 


see the img.now say does the thevenin current is in parallel or series with resistor.actually if you see the subtitle.u can realize they says that current is parallel
 

There is a clear error in the subtitle: they wrote "...resistor in series with a current source" instead of "...resistor in parallel with a current source"; the two pictures are correct.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…