current and voltage amplification

Status
Not open for further replies.
R

rachitmathur1985

Newbie level 2
Joined
May 7, 2013
Messages
2
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Visit site
Activity points
1,295
HI, Friends please help me in the uploaded circuit to get the current and voltage at-least to light 30 watt led's what am getting in the simulation result in Proteus Software.... am getting as of now as 4.7v and .27 amp.. at the input of led bank
 

Attachments

  • uploadit.png
    353 KB · Views: 90

HI, Friends please help me in the uploaded circuit to get the current and voltage at-least to light 30 watt led's what am getting in the simulation result in Proteus Software.... am getting as of now as 4.7v and .27 amp.. at the input of led bank
Click to expand...
Hi rachitmathur1985
Can you tell me more about what you're about to do exactly ? what is your problem ?

Best Wishes
Goldsmith
 

goldsmith said:
Hi rachitmathur1985
Can you tell me more about what you're about to do exactly ? what is your problem ?

Best Wishes
Goldsmith
Click to expand...

i am trying to make a system where illumination of an office room is automated where if a person is entering then light should switched on and if the room light is enough then led should glow dim, if no presence of humans in room then after a delay it should switch off.... we are using ldr and pir/ir sensor along with 555 timer ICs to complete the task but the main problem is that am not getting proper wattage for such luminicence for the led's so i need to know how to increase the wattage and what should be the spec of led's.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…