Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

CST studio S-parameters calculation

M

Max01800

Junior Member level 3
Junior Member level 3
Joined
Jan 5, 2024
Messages
25
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
161
We all know that to measure the scattering parameter Sij we need to excite port-j and measure on port-i but with all the other ports matched. So if we have a 2 ports network, to measure the S11 you need to excite port 1 and measure on port 1 but with port 2 matched. To measure the S21 you need to excite port 1 and measure on port 2. How does CST studio realize the matching condition to measure the S-parameters?
 

LaTeX Commands Quick-Menu:

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top