hamza_rafique
Newbie level 1
- Joined
- Jun 27, 2013
- Messages
- 1
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1
- Activity points
- 9
i am using 3 xbee Series 1 devices . 2 are slaves and the third one is master. a bi directional communication has to take place between salves and master and at the same time the 2 slaves are communicating with each other too.
the problem i am facing is that the master is unable to differentiate between the two slaves i-e if the two slaves are communicating all the time some data to master , the master picks up the data from either one of them at a single instant. when the communication drops between salve 1 and master , only then master connects to slave 2 .
so , is it the limitation of series 1 modules ? how can i create such a mesh ? (broadcasting maybe ? how ?)
thanks !!
the problem i am facing is that the master is unable to differentiate between the two slaves i-e if the two slaves are communicating all the time some data to master , the master picks up the data from either one of them at a single instant. when the communication drops between salve 1 and master , only then master connects to slave 2 .
so , is it the limitation of series 1 modules ? how can i create such a mesh ? (broadcasting maybe ? how ?)
thanks !!