counter implementation in simulink

[hanikapa]

I have a counter design in simulink that is active with rising edge of the clock. I use enable port to activate the output when the pulse level is high and reset the counter to initial state. But in my design when the pulse level is low, counter keeps the previous state. Does anybody have an idea?
thanks
the continues value at the output of counter is related to the time that the pulse is low level. I want that this constant value be resetted to initial state of the counter.

 

[phongphanp]

You must add gain box , then double click to put parameters such as Maximum valve , Minimum valve ,... etc. Add this to loop by break th line in a point of loop.

Consult the book : Matlab Handbook , also.