Correct assesment of PM and ringing frequency

Status
Not open for further replies.
D

diarmuid

Full Member level 2
Joined
Aug 4, 2011
Messages
143
Helped
10
Reputation
20
Reaction score
9
Trophy points
1,308
Location
Dublin, Ireland
Visit site
Activity points
2,429
Hello All,

I have the following 2 questions:

1. My first question is best described via an example:

Suppose well below my GBW my open loop phase response is say -160deg.
Then between this freq and the GBW suppose a LHP zero occurs to add +90deg.
Due to the LHP zero, suppose my phase response at GBW is now say -100deg.

Is my PM -40deg or -80deg?

2. When I apply a step input to a system with low PM the output step
response shows ringing (as we all know).
What is the frequency of this ringing?
Is it the frequency where the open loop phase response is -180deg?

Thanks for you responses,

Diarmuid
 

I agree with your 80deg.

Im in the process of setting up a sim and measuring the ringing. Its inbetween designs at the moment
but should have an answer next week. Will update this when I do.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…