Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[SOLVED] converting lux to W/m2

Status
Not open for further replies.

yashiro32

Member level 1
Member level 1
Joined
Sep 5, 2007
Messages
38
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Activity points
1,501
lux w/m2

Hi,

is there any formulas or equations to convert measured illuminance in Luxs to irradiance in W/m2

or

convert measured luminance in Cd/m2 to irradiance in W/m2
 

1 lx = 1 lm/m^2, what 1 lumen is depends upon the kind of light, e.g. for white light 1 lm = 5mW, for green light 1 lm = 1/683 W.
 

Keith, this converter gives results corresponding to maximum sensitivity of the eye (green light) WITHOUT MENTIONING IT.
 

There are other online converters - I cannot remember which ones I have used in the past. I usually end up looking up the values based on wavelength of interest.

Keith.

Added after 1 minutes:

This link may be useful:



Keith.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top