Converters of processors for a test panel

Status
Not open for further replies.

Vermes

Advanced Member level 4
Joined
Aug 2, 2011
Messages
1,163
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,316
Activity points
22,318


It is a useful development for a test panel. Few converters for different processors are made so that after their connecting to the processor, the nature and functioning of the test panel as a whole does not change.



Converters are available for processors:
  1. Atmega48, mega8, mega168, mega328
  2. Attiny2313 and similar
  3. Attiny13, tiny25/45/85 and similar
  4. Attiny26
Sometimes there are 2 stands on one board for two systems, but you can use only one processor at once.
The programming connector is built-in the board. The boards of converters are equipped with jumpers so you can use the quartz from the board or disable/enable the pin RESET.
Pictures:



How the set presents in the current state:



Ethernet can be tested on a sample application from tuxgraphics.com based on processors: Atmega88, Atmega168 or Atmega328 (a lot of memory).



At the end, an example of one of the converters scheme for processors: tiny2313 and similar and Attiny13 and similar:



Link to original thread (useful attachment) – Konwertery procesorów do własnej płytki testowej
 

Status
Not open for further replies.

Similar threads

Cookies are required to use this site. You must accept them to continue using the site. Learn more…