Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Convert Sensibus protocol to i2c

Status
Not open for further replies.
S

skyliner7445

Newbie level 1
Newbie level 1
Joined
Mar 4, 2018
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
11
Hi

First of all sorry for my english and sorry if this is not the right place for my question (moderators can place it at the right place :))

Well, I'm a newbie in electronics and my question is about if it is possible to read an i2c sensor (actually Sensirion SHT35) by a Davis Vantage Weather Station which only reads Sensibus protocol. It is used in SHT1x series communication.

Can be inserted an IC between Davis and sensor to convert the signal ?? If so, how can it be done ??

Thanks in advance
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top