Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

convert from mplab ide to mikroc compiler

Status
Not open for further replies.
H

h.sharma

Junior Member level 3
Junior Member level 3
Joined
Jun 16, 2012
Messages
30
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Visit site
Activity points
1,455
Hey, I have to convert this code to mikroc compiler. It is compiled successfully in mplab but it shows many errors in mikroc .
please help me..!!!
thanx in advance.
Code: 
#define LCD PORTB
#define RS portd.f0
#define EN portd.f1
#define _XTAL_FREQ 4000000
void cmd(void);

void temp_sens();




void main(){
int j=0;
char ldg[12]=" Loading...";
TRISD=0X00;
PORTD=0X00;
TRISC=0X00;
TRISA=0XFF;
TRISB=0X00;
PORTD=0X00;
LCD_init();
for(j=0;j<=9;j++)
{
        LCD=ldg[j];
        data();
}
while(1){
speed();
temp_sens();
press_sens();
car_temp();
}
}

void LCD_init(){
         LCD=0X38;        //using5*8dots
         cmd();
         LCD=0X0C;        //display ON
     cmd();
         LCD=0X01;        //clear lcd//
         cmd();
     LCD=0X80;        //intial cursor position//
     cmd();
}
void cmd(void){
RS=0;
EN=1;
delay_us(100);
EN=0;
delay_us(100);
}

void data(void){
RS=1;
EN=1;
delay_us(100);
EN=0;
delay_us(100);
}
void temp_sens(){
ADCON0=0b00000101;  //channel 1 AN0
ADCON1=0b11000000;

        int ii=0,j=0;
        float f;
        char t[21]=" Coolant Temperature ",disp[2];
        long h;
        ADGO=1;
        while(ADGO==1);
        h=ADRESH;
        h<<=8;
        h|=ADRESL;

        f = ((h*5.0)/1023)*100;
        float2string(disp,f);
LCD=0X94;   //3rd line cursor position
cmd();
for(j=0;j<=20;j++)
{
        LCD=t[j];
        data();
}     LCD=0XD4;        //4th line cursor position//
     cmd();
             while(disp[ii]!=0){
                     LCD=disp[ii];
                     data();
                         ii++;
            }
         ii=0;
}


void second(s){
for(i=0;i<=s;i++){
for(i=0;i<=10;i++){
delay_ms(100);
}
}
}
void float2string(char *str,float f)
 {
         int d=0,i=0,j=0; char *t;
         d =(int)f;

         while(d!=0)
          {
                  j=d%10;
                  //cout<<j<<endl;
                  i++;
                  d-=j;
                  d/=10;
          for(int m=i;m>0;m--)
                          str[m]=str[m-1];

                  str[0]=j+'0';
      }
        str[i]='.';
        i++;
        f=f-(float)((int)f);
        f=f*100;
        d=(int)f;
        t = &str[i];
        i=0;
        while(d!=0)
          {
                  j=d%10;
                  i++;
                  d-=j;
                  d/=10;
                  for(int m=i;m>0;m--)
                          t[m]=t[m-1];
                  t[0]=j+'0';

                  }
 }


void press_sens(){
ADCON0=0b00001101;  //channel 2 AN1
ADCON1=0b11000000;

        int ii=0;
        float f;
        char t[]="    Fuel(%) ",disp1[2];
        long h;
        ADGO=1;
        while(ADGO==1);
        h=ADRESH;
        h<<=8;
        h|=ADRESL;

        f =100-(((h*5.0)/1023)/5)*100;   //100-(% out of 5.0)

        float2string(disp1,f);

   //  LCD=0X94;        //intial cursor position//
   //  cmd();
for(j=0;j<=10;j++)
{
        LCD=t[j];
        data();
}
             while(disp1[ii]!=0){
                     LCD=disp1[ii];
                     data();
                         ii++;
            }
         ii=0;
}



speed(){
int j=0,ii=0;
float f;
char t[]=" speed(rev/min) ",o[]="overdrive",disp[3];
TMR0=0X00;
//TOCS=1;
//TOSE=0;
//PSA=0;
OPTION_REG=0b00000001;
second(1);
f=60*TMR0;   //REV/MIN
float2string(disp,f);
    LCD_init();
for(j=0;j<=14;j++)
{
        LCD=t[j];
        data();
}
             while(disp[ii]!=0){
                     LCD=disp[ii];
                     data();
                         ii++;
            }
         ii=0;
        LCD=0XC0;      //2nd line cursor  position
        cmd();
if(f>60){
for(j=0;j<=8;j++){
        LCD=o[j];
        data();
}
}

}





void car_temp(){
ADCON0=0b00010101; //channel 2 AN2
ADCON1=0b11000000;

        int ii=0,f;
        long h;
        ADGO=1;
        while(ADGO==1);
        h=ADRESH;
        h<<=8;
        h|=ADRESL;

        f = ((h*5.0)/1023)*100;
if(f>=25)
RD2=1;
else
RD2=0;

}


##############Here are the errors shown....############3


0 1139 Available RAM: 352 [bytes], Available ROM: 8192 [bytes]
0 126 All files Preprocessed in 94 ms
0 122 Compilation Started automotive sensors.c
26 315 Invalid expression automotive sensors.c
25 402 ; expected, but 'data' found automotive sensors.c
26 424 '}' expected ';' found automotive sensors.c
27 424 '}' expected '}' found automotive sensors.c
34 371 Specifier needed automotive sensors.c
34 396 Invalid declarator expected'(' or identifier automotive sensors.c
45 1503 Result is not defined in function: '' automotive sensors.c
54 396 Invalid declarator expected'(' or identifier automotive sensors.c
55 300 Syntax Error: ')' expected, but '=' found automotive sensors.c
55 402 ; expected, but '1' found automotive sensors.c
55 393 '' Identifier redefined automotive sensors.c
55 312 Internal error '' automotive sensors.c
0 102 Finished (with errors): 17 Jul 2012, 18:06:46 automotive sensors.mcppi
 

Code: 
#define LCD PORTB
#define RS portd.f0
#define EN portd.f1
#define _XTAL_FREQ 4000000
#define ADGO ADCON0.GO

void cmd(void);
void temp_sens();
void speed(void);
void lcd_data(void);
void LCD_init(void);
void press_sens(void);
void car_temp(void);
void float2string(char *str,float f);
void second(char nsecs);

void main(){
int j=0;
char ldg[12]=" Loading...";
    TRISD=0X00;
    PORTD=0X00;
    TRISC=0X00;
    TRISA=0XFF;
    TRISB=0X00;
    PORTD=0X00;
    LCD_init();
    for(j=0;j<=9;j++)
    {
            LCD=ldg[j];
            lcd_data();
    }
    while(1){
        speed();
        temp_sens();
        press_sens();
        car_temp();
    }
}

void LCD_init(void){
     LCD=0X38;        //using5*8dots
     cmd();
     LCD=0X0C;        //display ON
     cmd();
     LCD=0X01;        //clear lcd//
     cmd();
     LCD=0X80;        //intial cursor position//
     cmd();
}

void cmd(void){
    RS=0;
    EN=1;
    delay_us(100);
    EN=0;
    delay_us(100);
}

void lcd_data(void){
    RS=1;
    EN=1;
    delay_us(100);
    EN=0;
    delay_us(100);
}

void temp_sens(){
int ii=0,j=0;
float f;
char t[23]=" Coolant Temperature ";
char disp[2];
long h;

    ADCON0=0b00000101;  //channel 1 AN0
    ADCON1=0b11000000;
    ADGO=1;
    while(ADGO==1);
    h=ADRESH;
    h<<=8;
    h|=ADRESL;

    f = ((h*5.0)/1023)*100;
    float2string(disp,f);
    LCD=0X94;   //3rd line cursor position
    cmd();
    for(j=0;j<=20;j++)
    {
            LCD=t[j];
            lcd_data();
    }     LCD=0XD4;        //4th line cursor position//
    cmd();
    while(disp[ii]!=0){
        LCD=disp[ii];
        lcd_data();
        ii++;
    }
    ii=0;
}


void second(char nsecs){
char i;

    for(i=0;i<=nsecs;i++){
        for(i=0;i<=10;i++){
            delay_ms(100);
        }
    }
}

void float2string(char *str,float f){
int d=0,i=0,j=0; char *t;
int m;

    d =(int)f;

    while(d!=0)
    {
        j=d%10;
        //cout<<j<<endl;
        i++;
        d-=j;
        d/=10;
        for(m=i;m>0;m--)
                          str[m]=str[m-1];

        str[0]=j+'0';
    }
    str[i]='.';
    i++;
    f=f-(float)((int)f);
    f=f*100;
    d=(int)f;
    t = &str[i];
    i=0;
    while(d!=0)
    {
        j=d%10;
        i++;
        d-=j;
        d/=10;
        for(m=i;m>0;m--)
            t[m]=t[m-1];
        t[0]=j+'0';

    }
}

void press_sens(void){
int ii=0;
float f;
char t[]="    Fuel(%) ",disp1[2];
long h;
char j;
        
    ADCON0=0b00001101;  //channel 2 AN1
    ADCON1=0b11000000;
    ADGO=1;
    while(ADGO==1);
    h=ADRESH;
    h<<=8;
    h|=ADRESL;

    f =100-(((h*5.0)/1023)/5)*100;   //100-(% out of 5.0)

    float2string(disp1,f);

    //  LCD=0X94;        //intial cursor position//
    //  cmd();
    for(j=0;j<=10;j++)
    {
            LCD=t[j];
            lcd_data();
    }
    while(disp1[ii]!=0){
        LCD=disp1[ii];
        lcd_data();
        ii++;
    }
    ii=0;
}

void speed(void){
int j=0,ii=0;
float f;
char t[]=" speed(rev/min) ",o[]="overdrive",disp[3];

    TMR0=0X00;
    //TOCS=1;
    //TOSE=0;
    //PSA=0;
    OPTION_REG=0b00000001;
    second(1);
    f=60*TMR0;   //REV/MIN
    float2string(disp,f);
    LCD_init();
    for(j=0;j<=14;j++)
    {
        LCD=t[j];
        lcd_data();
    }
    while(disp[ii]!=0){
        LCD=disp[ii];
        lcd_data();
        ii++;
    }
    ii=0;
    LCD=0XC0;      //2nd line cursor  position
    cmd();
    if(f>60){
        for(j=0;j<=8;j++){
            LCD=o[j];
            lcd_data();
        }
    }
}


void car_temp(void){
int ii=0,f;
long h;

    ADCON0=0b00010101; //channel 2 AN2
    ADCON1=0b11000000;
    ADGO=1;
    while(ADGO==1);
    h=ADRESH;
    h<<=8;
    h|=ADRESL;

    f = ((h*5.0)/1023)*100;
    if(f>=25)
        PORTB.RD2=1;
    else
        PORTB.RD2=0;
}
Adjust the following line to suit your processor

#define ADGO ADCON0.GO
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top