Control voltage variation in PLL

Status
Not open for further replies.
M

maharaja1989nellai

Newbie level 4
Joined
Jun 23, 2012
Messages
7
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
India
Visit site
Activity points
1,316
Hi all,

iam finished my PLL inCP90nm.After locking my PLL the control voltage variation will be 6mV...After adding Decoupling capacitor(Decap=150p) between supply and ground the control voltage variation will be reduced to3.5mV...

my questions are
1) How much value of control voltage variation is best?
2) If i need control voltage variation about uV range what to do?
3) How much value of frequency variation is best?
 

What is the best ?
It depends on your application requirements and your design budget.
To reduce variation you have to increase the capa of your filter.
 

i set my loop capacitor filter are within the Bandwidth limit(bandwidth=Reference frequency/10)...I need my PLL control variation will be uV range..


thanks
 

I see,
So you have to use more sophisticated filters (higher order filter, active filter, etc)
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…