connector to 128*64 Character LCD Display

Status
Not open for further replies.
M

Mazytis

Newbie level 3
Joined
Jul 16, 2015
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
27
Hi everyone, my English speech is not very well, so I hope you understand me.

I bought graphic LCD display from ebay:
**broken link removed**

But I cant to find connector to them, maybe someone can help me?
Thankyou
 

Hi,

1) you need to count the number of contacts.

2) And you need to measure the pitch. Typical values are 0.5mm, 1.0mm... => and 1.25mm and 1.27mm !!

Hint: measure the distance (center to center) from pin 1 to pin 11 and divide it by 10...

Hope this helps

Klaus
 

Poor information on EBAY is common.

wiring dwg shows 12 fpc contacts with only enough width for 0.5 mm pitch but does not show thickness with pullout substrate tab.
Perhaps std. Thickness.

So my description is

Connector, FPC , Receptacle, SMT 12x0.5mm
 

Hi,

farnell has about 30 differnt types of it...

one major thing to consider is that some connectors have the contacts on top and others on bottom.
I think all of them are SMD types. Maybe you find an adaper PCB.

Some are ZIF some are not.
Some have horizontal FPC entry some vertical

Good luck

Klaus
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…