Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Connecting WinXP to WinME through modem

Status
Not open for further replies.
O

obiwantotobi

Newbie level 1
Newbie level 1
Joined
Sep 23, 2004
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
8
Hi all,

I want to connect one PC wich runs WinXP to another running WinME. I have installed the RAS server in the WinME PC and TCP/IP and IPX protocols. The problem I have is the following: when the client (WinXP) calls, after the client is registered to the network a message appears saying that TCP/IP returned with error 736 and IPX connected succesfully. In fact, I can browse the shared resources of the server (WinME) I think it is using IPX. But I can't get an IP address in any machine.
Does anybody know if this problem is due to PPP or TCP or WinXP?

Thanks
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top