neazoi
Advanced Member level 6
Hello I have two HF toroid transformers with some windings. Consider only windings A, C and A2, C2 in the picture attached, ignore all the others.
C is 1 turn and A2 is say 10 turns.
What will be the result of connecting them this way?
For example a signal of 1v (pp) that comes out of the C how is it affected by the A2 winding and what would be the result at C2?
Or in reverse, a signal of 1v (pp) that comes into C from A2, how is it affected by the C winding and what would be the result at A?
If a third transformer was connected between C and A2, it is obvious what the resulting voltages be, but without this transformer what is the result?
C is 1 turn and A2 is say 10 turns.
What will be the result of connecting them this way?
For example a signal of 1v (pp) that comes out of the C how is it affected by the A2 winding and what would be the result at C2?
Or in reverse, a signal of 1v (pp) that comes into C from A2, how is it affected by the C winding and what would be the result at A?
If a third transformer was connected between C and A2, it is obvious what the resulting voltages be, but without this transformer what is the result?