Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Connecting Common Mode Chokes in series configuration

Status
Not open for further replies.
P

praveenhunchi

Newbie level 3
Newbie level 3
Joined
Nov 15, 2009
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
India
Activity points
1,304
Hi,

In one of the power supply applications, we have connected two common mode chokes in series , one of them is made of 4uH and K=0.94 and the other is made of 4uH and K=0.96.

Since i wanted to calculate the impedance profile of the combination, can i treat them as a single common mode choke with a inductance of 8uH ?

If so what would be the effective coupling co-efficient of this combination ?

Thanks
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top