xmen_xwk
Full Member level 3
- Joined
- Sep 12, 2014
- Messages
- 172
- Helped
- 2
- Reputation
- 4
- Reaction score
- 2
- Trophy points
- 18
- Activity points
- 1,373
I need to do some switching and I want to turn off both +ve and -ve(GND)
I can use 1 NPN and 1 PNP transistor. But I'm wondering if I can use 2 NPN transistors only, I have some confusion about NPN. I've been reading for long time about transistors and now this is how I can use NPN.
But can I use NPN transistor like below schematic too ?
or only PNP can do this ?
I can use 1 NPN and 1 PNP transistor. But I'm wondering if I can use 2 NPN transistors only, I have some confusion about NPN. I've been reading for long time about transistors and now this is how I can use NPN.
But can I use NPN transistor like below schematic too ?
or only PNP can do this ?