Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Configuration of ACEX 1k10 via LPT

Status
Not open for further replies.

Skov

Newbie level 4
Newbie level 4
Joined
Mar 15, 2003
Messages
7
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
SPb
Activity points
92
acex 1k10

I'd like to configurate EP1k10 using SP mode and LPT.
I have the following questions.

1) What is the simplest scheme for that? I think two signals should
be enaugh - Data0 and DCLK. I'm ready to wait 1 second after
power ON for reseting of PLD. I don't need nStatus and nConfig.
Why not?

2) After the loading of fw the LPT pins will be activated again
by user program (from PC) for other purposes. Am I right
that this signals can't reset the operation of PLD?
Do I need the especial scheme for disconnection PLD from LPT?

Thanks.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top