comunication between two PCs

Status
Not open for further replies.
F

filjoa

Member level 4
Joined
May 19, 2006
Messages
75
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Activity points
1,771
Hi

my ideia is controller an robot (controller by serial port) witch have an PC with linux with an CCTV cam installed.

for this controller I have my laptop with windows.

my desktop and laptop stay connected ar WIFI.

what program your sugest to implement this?

I think like an tunel by IP adress where on laptop I send comand "run" and on Desktop recive this comand and after write on serial port to my robot...

someone can help me try make some like this?

best regards,
 

Hi

you can explain me how?

best regards
 

Step by step:
You need at least one Network card in both side.
You also need to use a network cable (cross-cable) - Cat5 or 6 for example
You also must install network card drivers and assign valid IP address for them.
Now connect the cable and check the network with ping command.
 

use access point for make network is better than
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…