Vermes
Advanced Member level 4
- Joined
- Aug 2, 2011
- Messages
- 1,163
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,316
- Activity points
- 22,318
It is a construction of processed refrigeration unit, parts of which were used to create a compressor.
What also you will need:
- 10l tank
- pressure switch
- regulator with water separator
- wheels (for example from an old mower)
- elements of gas pipe 3/8”
- 30mm angle
- pipe for handle
Wheels are used because the device turned out to be too heavy. You can also add soldered “hanger”.
Safety fuse was made of a 25cm long piece of hose, through which air gets inside the tank from the compressor. It can be seen in one of the pictures. Its resistance should be about 6 atm.
Link to original thread - Kompresor z agregatu chłodni (450W)