Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Communicating SmartCard with a microcontroller

Status
Not open for further replies.

akhileshchidare

Member level 3
Member level 3
Joined
Oct 4, 2005
Messages
59
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,286
Activity points
1,758
hi all,
i am going to work on smart cards.
i have got the TDK semiconductors 73s1121F smart card controller.
i am looking for a smart card and connector.
this is a 8052 core.
i am using this smart card for identification of device. some thing like i want to store the device id i that.
i am not able to communicate with the controller thru serialport.(just for testing)


can any one send simple code to communicate with the Smart card?


Akhilesh
 

Re: SmartCard

Please specify your card type and transmission protocol, then I can send sample code.
 

Re: SmartCard

ISO-7816 UART 9600 to 115Kbps (with 12MHz crystal) for protocols T=0, T=1
 

Re: SmartCard

hi all
I am also working with the smart card reader.I can interface the TDA8004 with Philips microcontroller(89c61x2)?.Is this possible or not?. Please send more details about that. Thanks in advance.
 

Re: SmartCard

Hey,

Am using TDA8029 smart card reader controller, and the cards am using are SCOSTA cards.
Am not able to read and write into the card.
The card follows T=0 protocol.

the problem am facing is,
1.Am able to read and write by creating MF(Master file),DF(Dedicated file) and corresponding EF(Elementry file) every time.
2. i have to create the file structure every time to perform read and write.
3. Am not able to read specific address whenever i want.

please can anyone help me in solving this.
please am in urgent.

Thanks,
ranjinihk
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top