Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Common Mode Filter Winding

Status
Not open for further replies.
J

jimmykk

Full Member level 3
Full Member level 3
Joined
Oct 2, 2014
Messages
158
Helped
0
Reputation
0
Reaction score
1
Trophy points
1,298
Activity points
2,865
Hi

I am winding a 8-pole(16-pin) Common Mode filter on EP13 Core and checking the impedance-frequency reposnse. I have a question regarding the Winding Method which is
Firstly, I Wind all the 8 wires around the core on one filter.
Using Second Method, i Wind 2 wires on each layer and then 2 on second layer and so on.
My question is how this Winding In first and Second Method effects the frequency response. Because there is a shift in the frequency response using these two Methods.

Thanks
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top