Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Reply to thread

No. The ratio of CM to DM inductance depends on choke design and coupling factor. It varies between Ldm = 4 Lcm (separated chokes) to Ldm < 0.01 Lcm (perfect coupling on high ur core).


Part and Inventory Search

Back
Top