Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Cohesion attributes question

Status
Not open for further replies.
S

sutapanaki

Advanced Member level 4
Advanced Member level 4
Joined
Nov 2, 2001
Messages
1,346
Helped
524
Reputation
1,050
Reaction score
489
Trophy points
1,363
Location
US
Activity points
11,153
Hi

Does anybody know which attributes numbers are reserved in Cohesion?
 

I still believe that there are people in this forum who know C0hesion better than me. Please guys I need the info.
 

The Hierachy/Schematic editor uses I think only the first 3 attributes. The rest of the attributes are reserved for the netlister tools and backannotation. Some tools could be setup for the right attribute number. The attribute numbers between 240 and 255 are for special pupose as symbole color highlight. But doc is bad regarding this.
 

I read that some of the attributes numbers could be used by the user, but I don't know which they are. Because you don't want to use something which is reserved by C0hesion for future use.
 

Simply browse through the various *.ini files found in

/config

design_settings.ini you will most of the used.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top