Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Cohesion AMS v6.0 load Hspice DC operating point ??

Status
Not open for further replies.
M

mark_nctu

Advanced Member level 4
Full Member level 1
Joined
May 7, 2001
Messages
111
Helped
4
Reputation
8
Reaction score
1
Trophy points
1,298
Location
TW
Activity points
683
hspice specify dc operation point

Dear Sir:

How to use AMS v6.0 to load dc operating point from hspice ?

Mark
 

cohesion ams

Can only load .op .txt which hsp!ce does not output.
 

load hspice

cadb0y said:
Can only load .op .txt which hsp!ce does not output.
Click to expand...

Hspice's dc operation point is saved in ***.lis .
I extract dc from ***.lis and save to ***.op .
When I load the ***.op, it shows a error.
But, Cohesion Systems says it can load dc from hspice.
Does someone successful load dc from ***.lis of Hspice ?

Mark

:(
 

cohesion ams 6

Actually there is no built in way for that.

But there is a generic read for backannotation. You have to write a script which convert your instance_op_parameter into the generic format. Smash generates that format.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top