Sanangpuria
Newbie level 2
- Joined
- Mar 19, 2013
- Messages
- 2
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Activity points
- 1,292
let say I have a transmitter and receiver and data is transmitted using embedded clock data line.
Than how receiver will extract clock signal from embedded stream. So that it can sample correct data without any issues.
As per My understanding there will be a PLL at receving side which will take input as a reference clock which is same for both transmitter and receiver.
and that PLL will generate a output signal which will act as clock signal for receiver.
Pls suggest me whether I m correct or not or Is there is any other method for clock recovery.
Than how receiver will extract clock signal from embedded stream. So that it can sample correct data without any issues.
As per My understanding there will be a PLL at receving side which will take input as a reference clock which is same for both transmitter and receiver.
and that PLL will generate a output signal which will act as clock signal for receiver.
Pls suggest me whether I m correct or not or Is there is any other method for clock recovery.