Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Circuits design help - three circuits, need explanation

Status
Not open for further replies.
J

jacksdums

Newbie level 4
Newbie level 4
Joined
Jan 24, 2009
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,311
Circuits design help

Hey Guys

I am planning to design three circuits and not sure how I will do it. The idea is to get a packet probably 8bit fed to a PIC16F628.

1. A circuit that can generate a packet
2. Circuit to convert this packet to 1 and 0s (digital)
3. Gets fed to Shift register

Probably after shift register I can design the interface to the microcontroller. Any ideas? Thanks

Jacksdum
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top