Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

cheapest way to make a multi master ppi cable

Status
Not open for further replies.
E

EnBomp

Newbie level 4
Newbie level 4
Joined
Feb 13, 2008
Messages
5
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,314
rs-232/ppi multi-master cable

does any one have the schematic or design for the multimaster RS232/ppi cable for siemens plc step 7 200
 

ppi cable

The "cheapest" way will be to buy it. In Europe the price for USB version is about 100 Euro. There are some trials to reverse engineer the protocol but there aren't any complete results.
 

rs232 ppi multi master cable

I agree with this.A colleague tried to connect at on Siemens PLC with a home made cable and the result was he burn up his notebook.So,if you find some schematics my advise is for you to be careful
Best regards!
Venix
 

usb ppi multi-master cable

Try this:

**broken link removed**

Best regards!
Venix
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top