Cheap Linear regulator has problems?

Status
Not open for further replies.
C

cupoftea

Advanced Member level 6
Joined
Jun 13, 2021
Messages
3,057
Helped
62
Reputation
124
Reaction score
139
Trophy points
63
Activity points
15,948
Hi,
The attached (LTspice and jpeg) of a cheap, high current linear regulator, (variable voltage by divider) is not commonly seen.
Do you know why this is?
 

Attachments

  • Darlington regulator.jpg
    119.2 KB · Views: 189
  • Darlington regulator.zip
    1.1 KB · Views: 161

Sort by date Sort by votes
Our habitual thinking has gotten so we don't turn that often to transistor circuits. IC's have taken the stage more over the years.

Power transistors are still in the role of workhorses. It's important to know how to use transistors. However it's not that easy to collect a whole catalogue of transistor circuits in our minds, plus a list of IC's and how to use them.
 
Upvote 0 Downvote
Hi,

Danadack's comment is a valid observation. Maybe testing/simulating under varied temperatures and input voltages and load stepping might shed light on why/why not. Not inferring, just suggesting reasons.

2N2222 is ~200 mA or so, right? , maybe ~300mW...?

With lots of simming of discrete versions of ICs and the disappointment that accompanies most forays in that direction (in my case), stability (besides psrr and temp. stuff) might turn out to be a lurking design flaw waiting to ambush the 'one set of conditions only' approach to checking a design's viability.

That said, reason may just be that some simple, useful circuits have fallen into disuse as an IC takes up less PCB space than several parts, and is cheaper.
 
Upvote 0 Downvote
The biggst problem I've encountered with this kind of circuit is the temptation to fit a fat capacitor at the base of the first transistor to improve ripple rejection. It does just that but if the output is momentarily shorted, the cap discharges through the base - emiiter junctions and destroys the first transistor. My experience is it usually goes fully conductive and the output voltage shoots up to almost input voltage.

Brian.
 
Upvote 0 Downvote
you might wan to add a current limit circuit

current sensing resistor in series with the output
NPN transistor emitter base across the current sense resistor,
collector to base of darlington

I limit = Von of NPN transistor/current sense resistance
or thereabouts.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…