Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Reply to thread

In this reference design schematic, the chassis ground is connected to digital ground using R22. A couple of questions on this.


  1. What is the reason for having R22 and why it should be 1210 package and not 0603 or 0402?
  2. Can I replace R22 using a capacitor (for connection between the chassis and digital ground)? What would the impact difference between using R and C?

Any typical capacitor value suggestion also will be helpful?


Part and Inventory Search

Back
Top