Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Charge at 24v and Discharge at 48v

Sinix

Newbie
Newbie level 1
Joined
Sep 24, 2024
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
8
Hey guys,

I´m trying to accomplish a system where it charges at 24 volts and discharges at 48 volts simultaneously.
I have a 3 phase generator that it´s connected to 2 Full Bridge Rectifiers.
I have 4x 12v batteries, 2 in series to make a 24 volt batteries.
Each 24 volt battery is connected to its own rectifier.
This is to Charge at 24 Volts.

Now, the tricky part! How to Discharge at 48V?
The yellow wire makes it a 48 volt battery. The Purple wire is the Positive 48V and the Orange wire is the Negative 48v.


Dxq2w0e.png


Is such a thing simultaneously possible?

Cheers
 

LaTeX Commands Quick-Menu:

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top