Characterization the cell using SiliconSmart

Status
Not open for further replies.
M

mehboobali

Junior Member level 1
Joined
Aug 27, 2013
Messages
17
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Location
Bangalore
Visit site
Activity points
90
Hello,

I wanted to start the standard cell characterization of any cell(say Inverter) using SiliconSmart. I have SiliconSmart license. Can any one please suggest me how to start characterization practically. By reading I know that the input to the SiliconSmart is SPICE transistor level netlist, SPICE model etc . Please suggest me while doing practically what all input settings I need to do.


Thanks in advance,

M.Ali
 


You have to configure some .tcl script. Like configure.tcl, driver.tcl, condition.tcl etc. It is mentioned in the siliconsmart manual. Beside this you need the basic inputs, like the spice models, cell level netlists, PTV corners. I do not have the manual right now, else I can guide you about the details.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…