Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Cellular telephone emissions locking-up electronic circuitry ?

Status
Not open for further replies.

Externet

Advanced Member level 2
Advanced Member level 2
Joined
Jan 29, 2004
Messages
606
Helped
28
Reputation
58
Reaction score
30
Trophy points
1,308
Location
Mideast US
Activity points
6,073
Hi.
Do the emissions of cell phones latch-up some integrated circuits, alter their operation ?

When are emissions stronger; during ringing, placing a call, talking, reporting to tower ?

Example : Remote controls ceasing to work properly if share a night table/shelf with a cell phone. Can the pre-programmed codes be altered when exposed to that RF ?
Remote controls for home appliances are not shielded at all.
 

Yes, it's possible..
The Average Power of Cellular Phones is 2W ( 33dBm) and this level may create a pretty high Electrical field that latches the electronic devices if they are not very well screened..
 

I've heard the vibrate-motor EMI on close-in radios.

But I would not expect latchup (as in triggering the
parasitic SCRs of the chip) from radiated emissions.
That takes >10mA of pin - substrate current by most
datasheets (and you can bet that's sandbagged).

Triggering some functional "lockup" by false signal or
signal corruption probably takes much less power
received. And products designed for ultra low standby
power and having no wall-connected EM threats in
mind, might be exceptionally sensitive. The capacitive
touchpad foils would be an excellent antenna.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top