Capture CIS issue... help!

[calibur]

Ok, I am having an issue in Orcad... I am trying to simulate a Common Emitter Amplifier with a 2n3904 transistor. My issue is that I am getting this error:

**** INCLUDING design1-SCHEMATIC1.net ****
* source DESIGN1
R_R1 0 N00533 10k
C_C1 N00611 N00533 470u
R_R2 N00533 N00503 20k
C_C2 N00771 N00882 470u
R_R3 N00771 N00503 1.5k
C_C3 0 N00678 470u
R_R4 N00678 N00649 39
R_R5 0 N00678 820
R_R6 0 N00882 3.3k
V_V1 N00611 0
+SIN 0 .25 60 0 0 0
V_V2 N00503 0 15Vdc

**** RESUMING design1-SCHEMATIC1-test.sim.cir ****
.END

ERROR -- Less than 2 connections at node N00649

That node is at the Emitter of the BJT. Attached is my schematic. Thanks in advance!

 

[taglan]

try the following:
right click on the emmiter pin of Q1, click 'edit propertis', check the 'net name' its value should be 'N00649' which is the net between R4 and the emitter of Q1. if not that means that the emitter of Q1 is assigned to another net leaving R4 pin alone in the net 'N00649'.