jimmykk
Full Member level 3
Hi
I am designing a wireless power Transmitter circuit and mostly following this datasheet for Wireless transmitter IC :- **broken link removed**
In the BOM table on Page 28-29, there are several capacitors and resistors which are shown in the Application Example Circuit but in BOM, there are marked as "OPEN" So i was wondering that if this "OPEN" means same as DO NOT MOUNT. Also the resistor and a common mode choke are marked as "SHORT". Are they shorted? Example for open and short :-
Here COSC1, COSC2, CCLMP, RCLMP are marked as OPEN in BOM with no values
while ROSC, COM_CH is marked as SHORT
I am designing a wireless power Transmitter circuit and mostly following this datasheet for Wireless transmitter IC :- **broken link removed**
In the BOM table on Page 28-29, there are several capacitors and resistors which are shown in the Application Example Circuit but in BOM, there are marked as "OPEN" So i was wondering that if this "OPEN" means same as DO NOT MOUNT. Also the resistor and a common mode choke are marked as "SHORT". Are they shorted? Example for open and short :-
Here COSC1, COSC2, CCLMP, RCLMP are marked as OPEN in BOM with no values
while ROSC, COM_CH is marked as SHORT