Capacitor vs inductor currents in AC. Smoothness.

Status
Not open for further replies.
T

triple5ic

Newbie level 1
Joined
Apr 27, 2014
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
7
With a 50Hz AC source and an inductor as a load the current waveform was smoother than that of the capacitor load. Why is this? Can it be explained using the current for an inductor =(1/L)*integral of the voltage, and for a capacitor the current is given by capacitance*(derivative of the voltage). The capacitor was 18uF. Thanks.
 

Did you observe the waveform across a resistor in series with the capacitor? In that case the capacitor acts as a high-pass filter. High frequency noise would show up.

I can see a lot of hash just by touching the probe clip. The waveform resembles a rocky mountain, instead of a 60 Hz sine wave.

An inductor acts as a low-pass filter. A resistor in series would show a waveform which appears more sine-like.
 

Status
Not open for further replies.

Similar threads

Menu
Log in
Register
Cookies are required to use this site. You must accept them to continue using the site. Learn more…